« back

CO2CELL

The series CO2CELL is suitable for research and growth of cell and other cultures and it is also frequen NO2. The operation of the CO2CELL incubators is based on the smooth gravitational flow of the operation gas in the electrically heated chamber with high relative humidity and selected gas concentration. The units operation is noiseless. As a standard, protective CO2 atmosphere is used. According to the customer’s wishes, O2 or NO2 can also be applied. CO2 concentration in the chamber is detected by means of an infrared sensor with an automatic calibration cycle. The units are provided with a standard (LED display) or comfortable (graphical LCD display) microprocessor control unit. 

  • Chamber volume: 50 and 190 liters
  • Working temperature: From 5 °C above ambient temperature up to 60 °C
  • Uncontrolled relative humidity: Up to max. 95 % RH at 37 °C
  • CO2 concentration: From 0.1 to 20 %
  • CO2 measurement with an infrared sensor
  • Inner chamber: Standard: Stainless steel DIN 1.4571 (AISI 304)
  • Comfort: Stainless steel DIN 1.4571 (AISI 316)

 

Basic characteristics of CO2CELL 50

  • Laboratory incubator with a protective atmosphere and chamber volume of 50 l
  • Natural air flow
  • Inner glass door
  • Noiseless operation
  • Wide range of variants and accessories
  • CO2Cell 50 is suitable for top-quality and safe processing of microbiological samples both in health service (IVF) and scientific laboratories

up | back

Basic technical data of CO2CELL 50

  • Chamber volume: 50 liters
  • Temperature range: From +5 °C above ambient temperature up to 60 °C
  • Uncontrolled relative humidity: Up to max. 95 % RH at 37 °C
  • Microprocessor control of the procedure
  • CO2 measurement with an infrared sensor and automatic calibration cycle
  • Output for connection to a printer or a PC (on request)

up | back

Basic design components of CO2CELL 50

The unit chamber and door are provided with a unique temperature control system that heats every chamber wall separately. The specially located heating bodies create spiral air flow inside the chamber. Thereby a very stable and homogenous temperature profile without temperature jumps is guaranteed. That is why the unit operation does not require a fan. In this way the risk of the samples contamination is completely eliminated. Thanks to the on-line watching of all important parameters, e.g. temperature and CO2 concentration, the new control system secures very short recovery times after the door opening. By eliminating the need of a fan, there are no vibrations inside the chamber, which is very important for a top-quality cultivation of cell cultures. The rounded edges of the stainless steel chamber and the system of shelves removable without use of any tool make cleaning easier and more effective. The CO2CELL 50 units provide an excellent ratio of inside volume/external dimensions. They can be placed both on a smaller laboratory desk and an office table. Despite their original and distinctive design they can be stacked using a reduction element. The use of an infrared sensor for CO2 detection means involvement of the latest technology in this branch. This sensor is independent on the relative humidity and has a considerably shorter recovery time than other technologies. The uncontrolled homogenous relative humidity of 95 % in the chamber prevents the drying-up of samples. The unit is also provided with a unique design that prevents condensation at another than at the specified place of the chamber and thus eliminates the undesirable contamination.

Changes in the design and make reserved.

up | back

Product series description CO2CELL 50

The new series of CO2CELL incubators with a chamber volume of 50 liters, temperature range from +5 °C above ambient temperature up to 60.0 °C, and a precise control of temperature and CO2 concentration is suitable for a top-quality and safe processing of microbiological samples in the sphere of medicine (IVF) and scientific laboratories. The series of CO2CELL 50 is characterized by a unique system of the chamber and door heating that eliminates the need of fan, secures the homogenous air distribution within the chamber and maximum relative humidity with absolute dry walls. The series of CO2CELL provides high operation comfort, precise regulation and very short times of temperature and CO2 concentration recovery after the door opening. The units can be provided with a control unit ”Standard” or ”Comfort”. The CO2CELL 50 incubators meet the requirements of the appropriate national and foreign standards, e.g. EN 61010-1, EN 50081-1, EN 50082-1, and other harmonized standards.

up | back

Basic characteristics of CO2CELL 190

  • Laboratory incubator with a protective atmosphere and chamber volume of 190 l
  • Natural air flow
  • Inner glass door
  • Noiseless operation
  • Wide range of variants and accessories
  • CO2CELL is suitable for top-quality and safe processing of microbiological samples both in all top health service worksites, scientific laboratories, and industry

up | back

Basic technical data of CO2CELL 190

  • Chamber volume: 190 litres
  • Temperature range: From +5 °C above ambient temperature up to 60 °C
  • Uncontrolled relative humidity: Up to max. 95 % RH at 37 °C
  • Microprocessor control of the procedure
  • CO2 concentration: From 0.2 to 10 %
  • CO2 measurement with an infrared sensor and automatic calibration cycle
  • Inner glass door (four- or eight-part on request)
  • Output for connection to a printer or a PC (on request)

up | back

Basic design components of CO2CELL 190

The unit chamber and door are provided with a unique temperature control system that heats every chamber wall separately. The specially located heating bodies create spiral air flow inside the chamber. Thereby a very stable and homogenous temperature profile without temperature jumps is guaranteed. That is why the unit operation does not require a fan. In this way the risk of the samples contamination is completely eliminated. Due to the on-line watching of all important parameters, e.g. temperature and CO2 concentration, the new control system secures very short recovery times after the door opening. By eliminating the need of a fan, there are no vibrations inside the chamber, which is very important for a top-quality cultivation of cell cultures. The rounded edges of the stainless steel chamber and the system of shelves removable without use of any tool make cleaning easier and more effective. The CO2CELL 190 units provide an excellent ratio of inside volume/external dimensions. Thanks to their optimized outside dimensions, these units can be placed either under or on standardized laboratory desks - boards. Further saving of space can be achieved by stacking the units. The use of an infrared sensor for CO2 detection means involvement of the latest technology in this branch. This sensor is independent on the relative humidity and has a considerably shorter recovery time than other technologies. The uncontrolled homogenous relative humidity of 95 % in the chamber prevents the drying-up of samples. The unit is also provided with a unique design that prevents condensation at another than at the specified place of the chamber, thus eliminating the undesirable contamination.

Changes in the design and make reserved.

 

up | back

Product series description of CO2CELL 190

The series of top-quality CO2CELL 190 incubators with a chamber volume of 190 liters, comfortable microprocessor control unit, graphical displaying of parameters and alarms on an LED display, temperature range from +5°C above ambient temperature up to 60 °C, and a precise control of temperature and CO2 is suitable for a top-quality and safe processing of microbiological samples in all leading laboratories in the sphere of medicine, science, and industry. The series of CO2CELL 190 is characterized by a unique system of the chamber and door heating that eliminates the need of a fan, secures homogenous air distribution within the chamber and maximum relative humidity with absolutely dry walls. The series provides also high operation comfort, precise regulation and short times of temperature and CO2 concentration recovery after the door opening. The CO2CELL 190 incubators meet the requirements of the appropriate national and foreign standards, e.g. EN 61010-1, EN 50081-1, EN 50082-1, and other harmonized standards.