« back

DUROCELL - Optional equipment – Comfort line

(please specify at ordering)

Access ports Ø 25, 50,100 mm (Ø 100 mm not available in 22-L volume)
The diameter, number, and location of the access ports is optional. The metal access ports are closed from the outer side by a special plastic plug enabling cables passing through from the outer space into the chamber.
.

Door lockDoor lock
Mechanical lock is situated on the upper front surface of the door near the closing mechanism. It serves for the unit opening prevention by an unauthorized person.
.

Left hinged doorLeft hinged door (except for 22-L volume)
The door is a model with mirror symmetry to the right hinged door.
.

inert gas connection
- protection of samples inside the chamber
.

separate PT100 sesnor
An additional freely movable sensor inside the chamber, by means of which the temperature inside the chamber or in the material can be measured. The sensor cables are connected to a connector located in the rear part of the unit.
.

WarmCommSpecial software WarmComm 4 B
The software is intended for recording the temperature regulation course in the temperature cabinets. The data acquired during the regulation are displayed in form of a graph (where the horizontal and vertical axis shows the time and acquired data, respectively). The program allows regulation monitoring in real time, saving the regulation course to a file on a disc, and viewing the formerly created files. The WarmComm 4 Basic software allows data monitoring of more than 10 connected units.
.

komunikační software WarmCommSpecial software WarmComm 3.0 Professional or WarmComm 3.0 F
The software is intended for recording the temperature regulation course in the temperature cabinets. The data acquired during the regulation are displayed in form of a graph (where the horizontal and vertical axis shows the time and acquired data, respectively). The program allows the regulation monitoring in real time, saving the regulation course to a file on a disc, and viewing the formerly created files.
- The extended version of the WarmComm 3.0 Professional software allows monitoring of the unit data and controlling the unit.
- The full version of the WarmComm 3.0 F software meets the requirements of FDA 21 CFR Part 11. Optional cable length: 5, 10, and 15 m.
.

Stainless steel unit jacket AISI 304
High design quality and long service life of the unit
.

Potential-free contact for alarm messages
Allows remote control of the unit operation. It is connected to a connector in the rear leg of the unit (24 V/1A).
.