« back

VACUCELL - Optional equipment – ECO line

BMS - Potential Free Alarm
Potential-free contact for alarm messages is taken out to the connector in the rear part of the device. Maximal load of the contact: 24 V/1 A.
.

Servotherm shelves (Alluminium or stainless-steel)
Servotherm – an intelligent system of shelves fixation for highly efficient transmission of heat to samples (patent protected).
.

Inner panels and shelves from stainless-steel AISI 316 Ti
This is optional equipment in higher quality of materials.
.

Mechanical door lock with a key
The mechanic lock is placed on the upper front surface of the door close to the closing mechanism. It serves for avoidance of the device opening by a non-authorized person.
.

Electro-magnetical door lock
In the course of the material exposition, the door of the device is blocked by an electromagnetic mechanism so as to avoid undesirable opening.
.

Stainless-steel exterior
High quality of design and service life of the device.
.

Flexible PT 100
Another additional freely movable sensor inside of the chamber; it can be used for measuring temperature inside the chamber or in the material. The sensor conductors are taken out to the connector placed in the rear part of the device. The display shows the data on temperature of the sensor.
.

Interior light
Lighting in the door lights the inner space of the chamber with samples. It is controlled by a touch button placed in the right upper corner of the door window.
.

Cart-type underframe
for an extra charge it is possible to order trays in stainless steel design and other numbers of trays dependent on the device volume.
.

Vacustation box
It serves for placement of vacuum pump e.g. MZ2C or e.g. MD4C (respectively some other pump of suitable dimensions) to the cabinet, the vacuum oven VACUCELL® is placed on it. Both of the items are screwed together.
.

Vacuubrand vacuum pumps MZ 2C NT AK+EK, MD 4C NT AK+EK
Chemical vacuum units are characterised by highly economic design with use of two-level membrane pumps with separator at the suction side and with emission condenser, completed with a pole carrying an analogue manometer and one needle valve.
.

Ramps programming
Setting the speed of temperature change of the program.
.

Programmable inner socket
It allows connection of a suitable device (shaker, mixer) placed inside of the device chamber. It allows setting of periodical switching on and off for the inner socket (max. power input 230V/1A).
.

Datalogger
The appliances save all and any data from the device.
.

Software WarmComm 4.0
It is designed for recording the temperature regulation progress in heating cabinets. Data obtained in the course of regulation is displayed in the form of a graph (with the horizontal axis showing the time and the vertical axis showing the data obtained). The program allows monitoring of regulation in real time, saving the regulation progress to a disc and also viewing of formerly created files.
.

Measurement/validation
Multi-point measuring of an empty chamber according to DIN 12 880, supply of attests for components together with non-filled-in IQ and OQ documentation and possibly also validation measuring with a batch.
.

IQ/OQ documents including measurement
„Installation qualification (IQ) - It proves and documents that the device and its supporting systems are appropriately selected, correctly installed and that they comply with required specifications.
Operation qualification (OQ) - It proves and documents that the device may repeatedly and reliably perform the proposed functions within the range of operation parameters.
.

Protocol printer
It allows archivation of the process running in the chamber of the device. A heading is printed on the print tape, containing information on device type, pre-set temperature, respectively ramp, number of cycles, fan revolutions and selected time interval of printing. values of the following data are printed in one line below the heading: time from program start, real temperature in the chamber.
.