« back

VACUCELL - Optional equipment – EVO line

(please specify at ordering)

separate PT100 sensor
An additional freely movable sensor inside the chamber, by means of which the temperature inside the chamber or in the material can be measured. The sensor cables are connected to a connector located in the rear part of the unit.
.

stainless steel interior – inner equipment of the chamber made of stainless steel

.

Stainless steel unit jacket AISI 304
High design quality and long service life of the unit
.

Cabinet stand Vacustation
Intended for the vacuum pump placement together with the cabinet. The Vacucell unit is placed on the cabinet stand Vacustation. Both units are screwed together in one unit.
.

inner lighting with a switch

.

Chemically resistant vacuum pump
E.g. vacuum pumps MZ2C, MD4C (or others of suitable size and capacity)
.

Chemically resistant vacuum pump with emissions separator and condenser
E.g. vacuum pumps MZ2C – emissions separator and condenser, suction capacity 1.7 m3/hour; MD4C - emissions separator and condenser, suction capacity 3.0 m3/hour (or others of suitable size and capacity)
.

Time-programmable inner waterproof socket (4 pins)
Allows connection of suitable equipment (shaking machine, mixer) placed in the unit chamber.
.

Built-in system for vacuum control
Allows creation of constant vacuum in the unit chamber. Pressure is measured electronically and indicated on the display. The unit is equipped with an electromagnetic vacuum inlet valve for automatic control, built in the upper part placed on the unit or on the vacuum pump, and with a special control board.
.

WarmCommSpecial software WarmComm 4 B
The software is intended for recording the temperature regulation course in the temperature cabinets. The data acquired during the regulation are displayed in form of a graph (where the horizontal and vertical axis shows the time and acquired data, respectively). The program allows regulation monitoring in real time, saving the regulation course to a file on a disc, and viewing the formerly created files. The WarmComm 4 Basic software allows data monitoring of more than 10 connected units.
.

komunikační software WarmCommSpecial software WarmComm 3.0 Professional or WarmComm 3.0 F
The software is intended for recording the temperature regulation course in the temperature cabinets. The data acquired during the regulation are displayed in form of a graph (where the horizontal and vertical axis shows the time and acquired data, respectively). The program allows the regulation monitoring in real time, saving the regulation course to a file on a disc, and viewing the formerly created files.
- The extended version of the WarmComm 3.0 Professional software allows monitoring of the unit data and controlling the unit.
- The full version of the WarmComm 3.0 F software meets the requirements of FDA 21 CFR Part 11. Optional cable length: 5, 10, and 15 m.
.

Potential-free contact for alarm messages
Allows remote control of the unit operation. It is connected to a connector in the rear leg of the unit (24 V/1A).
.