Basic features
- Small steam sterilizer
- Quick, powerful, smart and exceptional
- Saves space and consumption of media
- Fractional multiple evacuation
- Automatic door control
- Touch display offers top comfort control of the unit and provides comprehensive information about each phase of the on-going process
- A graphic printer or computer can be connected to the unit to print, assess and archive a detailed report on each sterilization cycle (RS 232 interface)
- Short delivery terms
Basic technical data
- Chamber volume: 15 liters
- Temperature range: From 105°C to 134°C
- Built-in separate full-scope steam generator
- Powerful air pump – perfect drying
- Two microprocessor control system (Master-Slave)
- Touch display for comfort control
- 10 user programs
- Separate control and cycle registration system
- Autonomous design or feeding by de-mineralized water from water works firmly connected to a water distribution network
- Separate distilled and used water tanks
- Enables testing and validation according to EN ISO 17665-1:06
Basic design elements
The pressure chamber, door panel and steam generator are made out of first-rate stainless steel (ČSN 17 347, DIN 1.4571, AISI 316 Ti). In order to save energy and minimize heat radiation, the chamber is perfectly insulated with ecological insulating material. Sensors, valves, the powerful air pump and other important design elements are manufactured by leading world producers. The unit is fitted with a pump to fill the distilled water supply tank and it does not need to be connected to water discharge piping.
Right of change of construction and design reserved.
Saves time and water consumption and provides for comfortable operation
- Compact dimensions and low weight
- Optimal effective output
- Quick steam generation system
- Programs with fractional pre-vacuum and multiphase drying with sterilization exposure time ranging from 4 to 60 minutes
- Several sterilization programs that can be selected depending on the type of sterilized material
- Three special testing programs
- The switching-on and starting of the unit program can be time-delayed
- Once a cycle has finished – automatic 1 hour tempered chamber
- Stand-by function – automatic pre-heating phase, keeps the temperature in the sterilization chamber at least 80°C for 1 hour after the unit has been switched on and after the cycle has finished.
Ergonomics and quality at the highest level
- automatic door closing
- touch display (graphic LCD)
- powerful membrane vacuum pump connected to cooler with no water connection required
- automatic control with two microprocessors
- fraction vacuum drying with forced ventilation
- built-in separate tanks for demi water and waste water with the volume of 6,5 litres – sufficient for performance of at least 5 sterilization cycles with maximal possible load
- indication of max./min. water level
- batch counter
- RS 232 interface with possibility of external printer connection for documentation of sterilization processes
- possibility of PC connection with communication software PrinterArchiv for data saving
- possibility of change of sterilization programs parameters using the software UNICONFIG
Safety Equipment
- common two-processor management and control system of sterilization
- mechanic - electric system of door blocking with micro switches
- automatic transition to safe conditions in case of program interruption
- error warning messages
- antibacterial filter reliably provides quality of chamber aeration after the drying phase in case of underpressure
- safety valve for protection against max. allowed overpressure exceeding
- thermal fuse for protection against inadmissible overheating of electric heating of the sterilization chamber jacket
- thermal fuse for protection against inadmissible steam generator operation without water
Conformity with European standards
- The unit complies with the technical and legislative regulations of the Czech Republic and the EU – Council Directive 93/42/EEC, the EN 13060 standard for small steam sterilizers, and others.
Sterilization programs
- P1 Unpacked, fast – 134°C/4 min
- P2 Packed instruments,packed materials 134°C/7 min
- P3 Textile, containers, packed materials with intensive drying 134°C/7 min
- P4 Rubber, cavities– packed products of glass, rubber and plastics 121°C/20 min
- P5 Packed, fast134°C/7 min, (max. load 0,5 kg)
- P6 Cavities, fast121°C/20 min, (max. load 0,5 kg)
- P7 Special– special program with parameters according to client´s wish. Programmed data of the special program permanently remain in the device memory, unless overwritten by other data
- P8, P9 Bowie & Dick test / HELIX test – steam penetration test 134°C/3,5 min
- P10 Vacuum test – test of chamber air tightness, balancing phase duration 5 min, test duration 10 min
Note: The temperature and time data of sterilization programs are stated without evacuation and drying times.