| |
|
|
Chemical-resistant double glass
The door is made of two layers of tempered glass, resistant to chemicals, even the most aggressive ones. It allows to see inside the wash chamber during operation.
|
|
Stainless steel design
The wash chamber is made of stainless steel AISI 316L (EN 1.4404) while the chassis and external panels are made of stainless steel AISI 304 (EN 1.4301). They are shockproof and long-lasting. Scotch Brite surface finish makes cleaning easier. The hydraulic system is also made of AISI 304 stainless steel, on request it is possible to make it in AISI 316 stainless steel.
|
|
Ergonomic handle
Thanks to the ergonomic handle, on models equipped with manual door, the door opening and closing functions are made easy without efforts.
|
|
Door locking and security system
The machines are equipped with an automatic door locking system that ensures the door is locked safely, while the crush gasket ensures its sealing. For the safety of the operators, the machine does not allow the door to be unlocked during the wash cycle or in the presence of high temperatures. An extra sensor guarantee that, even if in presence of a malfunction of the machine, the water pump will be switched off with the unlock of the door.
|
|
Touch-pad keyboard with graphic display
The touch control panel consists of 8 backlit buttons and a 3,5" LCD display. Uniclean HP 10/10A/15A (and their vairats) are equipped with 7“ touch-screen. Models with pass-through door are equipped with a second 3.5" LCD display on the unload side, on request 7" touch-screen is available). The flat display with colour graphics shows all cycle parameters, alarm messages, temperatures measured by the two temperature probes located in the washing chamber, drying temperatures and the A0 value. Models with pass-through door are equipped with a second 7" monitor on the discharge side.
|
|
Alarm-check system
This system helps the operator to understand why an alarm has occurred before consulting the user manual. A text appears on the display with the number, the image of the alarm and the text explaining the possible causes of it.
|
|
Customizable programs
The machines are supplied with a set of standard programs, variable according to the model, and with the addition of customizable programs, up to a maximum of 40 total programs.
|
|
Wash chamber LED light
On request, the machines can be equipped with low energy consumption LED positioned inside the wash chamber. The LED ensures a better visibility during the wash cycle and during loading and unloading of the basket or trolley. The LED may vary in color depending on machine status: white light for stand-by, red light in case of alarm, and green light when the cycle is successfully completed.
|
|
Reliable washing
Thanks to a dedicated pressure switch that monitors in real time the water pressure of the washing circuit, all the washing parameters will be always perfect. An alarm message on the display will indicate if there’s a pressure lost during the cycle, causing a cycle stop.
|
|
Microcontroller
The machines are equipped with a microcontroller that constantly monitors its operation. It’s provided with an internal flash memory that allows the machines to store all the information regarding: cycle params, allarms and log history. An internal watchdog monitor the microcontroller and block the device in case of a malfunction.
|
|
Water softener system
On request, the machines can be integrated with a system that makes it possible to soften the cold and hot water (depending on the model) entering the wash chamber, so as to reduce the formation of limestone in the hydraulic circuit of the machine. The machine automatically regenerates the resins based on the water hardness set at the time of installation.
|
|
Drying with HEPA H14 filter
During the drying phase the forced air, pushed by a blower, is introduced into the washing chamber, passing through an electric heater. The air then comes out of the jets of the spray arms to ensure a warm uniform air distribution. The HEPA H14 filter allows to block the fine dust present in the air with an efficiency of 99.995%. Furthermore, in order not to damage the filter, a pre-filter is placed in front of it to block the larger particles.
|
|
Filter cleaning sensor
A dedicated vacuum switch monitors the HEPA H14 filter clogging. An alarm message on the display will indicate that the filter is clogged.
|
|
Steam condenser system
The machines are equipped with an effective steam condenser system that acts to reduce the steam during the disinfection and drying phases.
|
|
Chemical dosing control
The dosing system for chemical products is controlled by a flowmeter. If the flowmeter doesn’t perceive the passage of the liquid, after a few seconds the display will show an alarm that warns the operator of the non-dispensing of the liquid in the wash chamber.
|
|
Chemical products level sensor
The machines are equipped with a sensor placed in the suction probe of chemical products, which warn the user if the liquid is running out through a warning that appears on the LCD display.
|
|
RS232 port connection
|
|
USB port
The two USB ports:
• USB 2 type A for PC USB: allows to connect the machine to a PC for programming;
• USB 2 type B for flash drive: allows to download the history of programs executed and alarms, or for update the firmware and dataset.
|
|
Washer RePortal
Software to connect to the machine to manage the user PIN and download, via USB PenDrive, the cycles ran, that are saved on a special database, moreover it is possible to generate the cycle reports in PDF format and export them in CSV format.
|
|
User pin management
Manage a secure access to the programs by the users. An user name and password protection level limit the access to the device only to authorized personnel.
|
|
Boiler for Speed Cycle (only with Uniclean HP 8-LB1)
The models with boilers help to speed up the water heating times and to save water. The first boiler is filled with deionized water maintained at a pre-set temperature thanks to its internal heating element, it helps to reduce the electricity consumption and to increase system efficiency; The deionized water is sent to the second boiler via a pump, allowing for shorter hot water loading times and water savings at the end of the phase.
|
|
Detergent storage compartment
On the Uniclean HP 8 models with side panel, the detergent storage compartment is located in the side panel with a handle to allow access to it. In the Uniclean® HP 10 models the tanks are located in a compartment with locked door at the bottom of the machine.
|
